LM-ETFE AH Series

Fluon®LM-ETFE
AH Series

Fluon® LM-ETFE AH series is a fluoro resin with adhesive properties, and is possible to adhere to other materials by melting.
It can be applied directly without adhesive agent or surface treatment used in previous systems.
Excellent adhesiveness of the two-layer system is effected in only one step.
Conventional properties such as anti stick, ETFE mouldability and chemical resistance are the same as those of conventional ETFE.



Features of Fluon®LM-ETFE
AH Series

  • Adhesive ability

LM-ETFE AH series enable melt-bonding to other materials without special adhesives or surface treatments while maintaining LM-ETFE properties.


Grades of Fluon®LM-ETFE
AH Series

ah-3000

Conductive type
AH-3000

ah-2000

Non-conductive type
AH-2000




Applications of Fluon®LM-ETFE
AH Series

Multi-layer tube made from AH Series/other materials

Multi-layer film made from AH Series/other materials



Basic properties of Fluon® LM-ETFE AH Series

terms standard unit AH-2000
(Non-conductive type)
AH-3000
(Conductive type)
LM-730AP
(Conventional ETFE)
Melt Flow Rate ASTM D3159
(297℃, 49N)
g/10min 25 25 25
Specific gravity ASTM D792 - 1.78 1.80 1.78
Melting point - 240 240 225
Tensile strength ASTM D638 MPa 49 35 40
Elongation ASTM D638 % 420 350 400
Flexural modulus ASTM D790 MPa 790 1240 650
Izod impact strength 23deg.C ASTM D256 - Non-Break Non-Break Non-Break
Permeation rate
(CE10, 60deg.C)
JIS Z0280
(Cup method)
g*mm/m2*24h 2.6 2.0 4.9
Surface resistivity - Ω/sq - 1.0×103 -
Surface contact angle Hanging dropmethod degrees 100 106 103


Product Lineup


About Fluoropolymers

This website is dedicated to fluoropolymers and in particular Asahi Glass' own brand of fluoropolymers, Fluon®.
Fluoropolymers are highly functional plastics with unique characteristics.

AGC AGC
© Copyright ASAHI GLASS CO.,LTD 2005-2015. All Rights Reserved.